Content
I have gotten rid of all existing flooring and also mounted a brand-new 3/4 ″ plywood after finishing it with water sealer. I bought a residence and despised the sheet vinyl in the restroom, as well as 6 layers of wallpaper!
Apply a layer of adhesive on top of the old tiles as well. Then, comb the adhesive in one direction – don't get fancy here. Your tiles will stick better if the adhesive is combed in one direction in parallel lines without swirls. Once you evenly apply the adhesive it is time to lay your tiles.
You should eliminate and also replace any rotten wood prior to tiling. Ensure you have a good solid plywood subfloor, after that screw down a layer of 1/2 ″ concrete backer board in addition to it to act as a base for the floor tile. As a result of issues with seasonal timber movement as well as cupping, putting 1/4 ″ concrete backer board straight on top of a strong wood subfloor is not advised. A far better choice, if you can't take the wood up, is to place a layer of plywood in addition to the wood flooring, complied with by cement backer board and also ceramic tile.
Since I have actually strolled on the "crunchy" spots a fair bit, they have reduced significantly. I picture the dried substance has actually gotten into smaller sized granules as well as settled, for that reason causing less of the crisis I got upon very first strolling on it.
I think I really did not mix in enough water in the glue concrete mix. I was going for a "peanut butter" uniformity, yet by the time I got it on the floor it was likely as well completely dry. When I troweled it accross the wood it would at times not also stick, yet just glide over without "damping" the board.
I removed 2 layers of sheet vinyl, a thin sheet of wood, and am currently obtaining the particle board. Below every one of this is the initial oak hardwoods-- it was originally part of an area that was exchanged a restroom. At the wood degree the washroom is degree with the hallway. What would certainly I require to place on top of the woods prior to tiling?
In showers, the movement joints are all the corners, vertically and horizontally. But it isn't flexible enough to stay intact where a shower pan or tub meets surrounding walls. Nor is grout the right material for filling the corner joints on the walls. For these spaces, the right material is caulk.
I filled the openings with timber filler, discolored and also varnished the threshold as well as it looks stunning. In preparation for ceramic tile operate in my tiny 4 × 5 shower room, I lately put down backer board over a brand-new layer of plywood subfloor. I place glue mortar concrete under the concrete backer board after that screwed the board down. When strolling on components of the backer board, the next day I obtained a crunchy sound.
1/4 ″ concrete board was than glued and also screwed over the plywood. Then a 12 ″ x 12 ″ mosaic ceramic tile on a mesh support was the floor tile we used. The flooring looks terrific as well as there have actually been no worry at all. The only issue we had existed was a 1-1/4 ″ distinction in the flooring elevation of the washroom and also my hallway which has the usual long-leaf want tongue and also groove flooring. We needed a limit that would certainly account for the floor elevation distinctions however there was absolutely nothing on the market that you might simply get.
Is there any advantage or added preparation required when making use of these items with the glowing floor warming up mats? Also, is there something added I'm expected to do to water resistant this things? I keep seeing that pointed out in forums and I'm not truly certain exactly how that applies. I was asking yourself if I must waterproof then place thinset and also connect concrete board with the thinset and or nails that experience concrete, after that the ceramic tile.
Or should I rip the wood flooring out also and after that placed cementboard down? I have energy and time, I just require to understand the most effective path to take.
Laying tile is easy but laying tile and doing it well is difficult. From that angle, it may make more sense to hire a professional tiler than to do it yourself. Unfortunately, thinset will also reposition your tile for you, especially in the case of vertical wall tile.
Would it be a good idea to get rid of one of the plywood as well as mount the cement flooring before setting the floor tiles? One professional is suggesting that we ceramic tile exactly on top of the vinyl flooring which I am not as well keen on doing. The kitchen area currently has plastic flooring in addition to hardwood floor covering on top of of wood sub-flooring. I have actually read that cement backboard is the method to go when laying floor tiles, but I'm anxious that it will add far excessive height to the kitchen area floor contrasted to the floorings of surrounding areas.
Hi, My spouse as well as I reside in a house that my Dad as well as I built ourselves three years back. We hadn't rather ended up the house (trim job, kitchen area counter tops, etc. still to do) when we moved in as well as for the last 3 years our washroom flooring has simply been the plywood subfloor. flooring dublin are preparing to take down floor tile and a under floor furnace. I've been trying to make a decision whether to use Hardibacker or concrete board over the plywood.
It would certainly rely on what facility the joists get on, the density and product used for the subfloor, and the problem it remains in. If you can disperse it by strolling on it between the joists, you possibly ought to add an added layer of 1/2 ″ to 5/8 ″ plywood on top of the existing subfloor, prior to using the cement board. I have 2 layers of plywood under the current plastic floor covering.
That trouble was addressed by using the nicest-looking, straightest framework 2 × 4 I could discover. My handyman took the door molding off, cut the 2 × 4 as well as molding to fit the opening and after that developed a lip to fit over the tile. We then beveled the leading edges-- one bevel on the washroom side and one bevel on the hallway side. He utilized 3 ″ screws to screw the change threshold to the wood floor beneath and also utilized a countersink drill little bit so the screws would not show.
0 
Star